SP Edge Kote Matte

DESCRIPTION

DESCRIPTION

Gives a waterproof coat to edges.

Comparison with SP Edge Kote
＊One coat of SP Edge Kote has been applied, and three coats of SP Edge Kote Matte have been applied.

Applying repeated coats after drying will give a thicker coat to the edge surface.
Use LC Pre Kote to better seal off the finish.

It can be used on tanned leather, chrome tanned leather or synthetic leather.

Continue applying 2 to 5 coats to create a thicker finish. (If you want to apply additional coats, make sure the surface is dry before applying them.)

Use LC Pre Kote to finish the primer and then apply SP Edge Kote to create a clean edge surface.

It is flexible and resistant to cracking even when bent, and is recommended for finishing belts and bag handles.

SIZE

100 cc

COLOR

Black

White

Red

Blue

Yellow

Dark Brown

Neutral

You can make your own color by mixing those colors up.

SP Kote can be mixed to make original colors.
The color of the edge can be customized according to the color of the leather,
so if you have our basic colors, it will be very handy.
The following are just some examples, but please refer to them.

Black×White　

Blue×Red　　

Blue×White　

Blue×Yellow　

Red×Yellow　

Red×White　

HOW TO USE

Apply with a Foam Brush or Wool Dauber .
Once the coat dried, apply repeatedly as many times as you like.

Please stir the mixture thoroughly before each use to make sure the solid pigments and other ingredients are poperly combined, since they tend to settle out from the liquid part.

WARNING

This item have a possibility to freeze at low temperature. Cold weather in the delivery address may cause a quality loss during transportation.