Leather photo frame - Mini Kit < LC Tooling Leather Standard > (1 set)

DESCRIPTION

DETAIL OF LEATHER

LC Tooling Leather Standard

DESCRIPTION

The grain side is particularly smooth with less scratches.
Natural one is the ideal leather for dyeing and carving. And the color becomes beautiful russet color after aging.
For Black and Dark Brown, dyes are fully struck through (dyed all the way through).

KIT CONTENTS

Leather part x 6, Rivets x 1, Transparent Sheet x 1

SIZE

7 cm x 10.5 cm
Thickness: approx 2.5 mm ( A, B )
Thickness: approx 1.2 mm ( C )

COLOR

Natural / Black / Dark Brown

HOW TO MAKE

①	Treat the back side of the body leather, the parts to become the feet, the back sides of the parts to be attached to the 4 corners and the edges (cross-sections of the leather) with the gum tragacanth.
②	Attach spots, concho, Swarovski, Shape Punch, stamping, according to your preference!!
③	Glue carefully the edges of the leather parts to the four corners of the main body with Leather Glue & Applicators , etc.
④	Sew around the edges when the bond dries. Fasten the leg part to the main body with the accompanied rivet. At this time, if you do not tighten the rivet and leave it half-tightened, you can rotate the leg and change the direction to stand up vertically and horizontally.
⑤	It will be finished if you treat the edges (cross section of the leather) of the parts which were pasted together.