LC Diamond Stitching Chisel (6 Prongs) 4.5 mm pitch

FEATURES

USE & FEATURE

6 Prongs
4.5 mm pitch.

The "Pitch" is the center-to-center hole spacing in millimeters.
You can calculate the SPI(Stitches per inch) from Pitch this way.
SPI = 25.4 / Pitch
For example, as for 3 mm-pitch tool, it has 25.4 / 3 = 8.5 stitches per inch.

DESCRIPTION

DESCRIPTION

LC Diamond Stitching Chisel's teeth are polished by hand work by a craftsman.

This is a cost effective tool made from heat-treated iron, and finished with black coating for corrosion resistant.

Material: Iron (heat-treated)
Finish: Black coating, Knurled handle
Made in Japan

How to Use

1 Prong

For a small corner

2 Prongs

For a small curve

3 Prongs

For a large curve

4 Prongs

For a short line

more than 4 Prongs

For a long line

SIZE

4.5 mm

4.5 mm

* There is some pitch tolerance.
* Because these blades are hand-finished, there may be some margins of error in the thickness and width of the blade.

---

Side of the cutting edge

Comparison of stitch spacing

---

HOW TO USE

 CAUTION

1. Make sure the tool is driven and pulled out in a vertical direction to leather.
2. Please work on a rubber pound board .
3. If the prong gets stuck deep in a rubber plate, make sure pull it out in a vertical direction. Do not shake or twist the handle from side to side, which will break the prong.

It is recommended to put the teeth in wax (e.g. sewing wax, beeswax) before using for thick or hard leather.

VIDEO