FLINT TOOLS Edger - Walnut #0 (0.6 mm)

DESCRIPTION

DESCRIPTION

This is an edge tool shaped in such a way as to draw a gentle arc toward the tip.
Not only its sharp cutting, but also the shapes of the tip and back side, which were thought to keep off the trace of the blade and are finished by hand, are the most charactereistic.
The D2 steel tip is optimized for thickness and solubility, and the grooves are cut long enough and carefully finished one by one, so that it can be cut more smoothly with less force.
It can clean off not only straight lines, but also edges such as inner radius and sharp corners.
This is an edger with a casual atmosphere that has never been seen before.

#0 (0.6 mm) is suitable for edge removal of thin leather.

<Material>
Blade: D2 steel
Handle: Walnut

<Sample>

You can tool the edge of the inside bending radius smoothly and neatly.

<Sample>

It is characterized by the shapes of the blades which are figured out not to leave the trace of the blade on the leather.

SIZE

#0 (0.6 mm)

From the left: #0 (0.6 mm), #1 (0.8 mm), #2 (1.0 mm), #3 (1.2 mm), #4 (1.4 mm)

#C28183 FLINT TOOLS Edger - Walnut (#1 - #4)

HOW TO USE

<Maintenance method>
* In order not to change the shape of the blade back, please polish by applying Jewelers Rouge to the edge-tooled leather for the daily maintenance.
Do not use any water resistant paper, etc.

Tool the thick, relatively firm leather edge (flesh side).

Apply Jewelers Rouge to the tooled edge.

Set the backside of the blade to the edge and pull it toward you to burnish.