LC Diamond Stitching Chisel (32 tools set)

LeatherCraft.jp

SKU: #LCH32

  • Price
  • ¥24,194
Add to Cart

Qty:

You earn 241 points for rewards

FEATURES

USE & FEATURE
32 tools set from 1 prong to 10 prongs. Consists of tools (2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6 mm).

1 Prong:2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm pitch
2 Prongs:2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm pitch
3 Prongs:2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm pitch
4 Prongs:2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm pitch
6 Prongs:2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm pitch
8 Prongs:4 mm pitch
10 Prongs:3 mm pitch


The "Pitch" is the center-to-center hole spacing in millimeters.
You can calculate the SPI(Stitches per inch) from Pitch this way.
SPI = 25.4 / Pitch
For example, as for 3 mm-pitch tool, it has 25.4 / 3 = 8.5 stitches per inch.

DESCRIPTION

DESCRIPTION


LC Diamond Stitching Chisel's teeth are polished by hand work by a craftsman.


This is a cost effective tool made from heat-treated iron, and finished with black coating for corrosion resistant.

Material: Iron (heat-treated)
Finish: Black coating, Knurled handle

Made in Japan


How to Use
1 Prong
For a small corner
2 Prongs
For a small curve
3 Prongs
For a large curve
4 Prongs
For a short line
more than 4 Prongs
For a long line


SIZE
2.5 mm

2.5 mm

3 mm

3 mm

3.5 mm

3.5 mm

4 mm

4 mm

4.5 mm

4.5 mm

5 mm

5 mm

5.5 mm

5.5 mm

6 mm

6 mm


There is some pitch tolerance.





Side of the cutting edge


Comparison of stitch spacing



HOW TO USE

 CAUTION

1. Make sure the tool is driven and pulled out in a vertical direction to leather.
2. Please work on a rubber pound board .
3. If the prong gets stuck deep in a rubber plate, make sure pull it out in a vertical direction. Do not shake or twist the handle from side to side, which will break the prong.

It is recommended to put the teeth in wax (e.g. sewing wax, beeswax) before using for thick or hard leather.

VIDEO

  • Play

Related items for Hole Punches