From tracing Tooling Pattern Template to carving with Swivel Knife, engraved stamping and decorative cutting.
This is a method of "magic knitting" in which a single piece of leather is knitted without cutting off the ends.
Keychain with Native American Charm "Kokopelli" and mountain bird feathers.
Here are some examples of necklaces made with Native American Charm "Buffalo Scull" "Feather" and beads.
How to install the ring hardware for Round Keychain Kit using Double Cap Rivets.
From dyeing with Fiebing's Antique Finish to finishing with Fiebing's Tan Kote.
From traced line carving to engraved stamping and decorative cutting.
From preparing the leather to tracing LC Western Belt Tooling Pattern Template #1 with a stylus and carving the borderline with Swivel Knife.
How to finish the edge and flesh side of Round Keychain Kit using a flesh side finishing agent, or SP Edge Kote.
How to finish the edge and flesh side using a TOKO PRO Burnishing Gum, or SP Edge Kote.
From stamping with Stamps to finishing.
From cutting with Swivel Knife to stamping with Stamps.
From punching a hole with Spot Setting Tool to installing Spots with Round Nose Pliers and a setter and completing the process.
From preparing the leather to how to trace the pattern using Stylus.
How to install a Pull The Dot Snap Fasteners that can only be removed from one direction.
Here's how to replace a normal Snap Fastener with a Pull The Dot Snap Fasteners.
Practicing freehand straight, curved and decorative cuts with Swivel Knife.
Here's how to sharpen cutting instruments using Oilstone and a file folder made of hard paper.
How to finish, care for and maintain with Montana Pitch-Blend Leather Oil and Conditioner and brushes.
How to install a Multi-Purpose Segma Type Snaps that allows you to replace the buckle
From punching holes for buckles to putting molds on to make holes for spots.
Here are the belts I made from Hermann Oak Harness Leather and the Conchos I used.
From finishing the edge surface with LC Toko Gum, to treating the edge with SP Edge Kote, and preparing the pattern to be used this time.
From treating the corner of the edge with LC Super PRO Edge Tool, to dyeing the edge surface, and polishing the edge and flesh side.
For Key Fob, how to do mirror shine on the edge and flesh side, and how to attach the coin Conchos and snap fasteners.
Demonstration of how to sharpen the Swivel Knife.
From carving to finishing while using LeatherCraftTools.com original coasters and patterns.
About the effect of partial skiving on the buckle side of the belt.
This shows you how to sharpen a Skiving Knife, which is essential for cutting leather.
This shows how to install a decorative rivet, using a Star Rivet as an example.
Here's how to install Spring Snap Fastener.
Since the tip of the Spring Snap Setter is cylindrical, start hammering with the female part attached to the tip.
This is a screw-type bookbinder installation that can be removed multiple times.
Drill a hole with Round Hole Punch or similar tool to match the hole in the screw insertion area.
Set the binder, insert the screws and secure it with a Flathead screwdriver.